Joe C.
Austin, TXMember since February 2019

Reviews (1)


    • Mar 1, 2019
    • Verified Reviewer

    SuperBoost Wifi

    Disappointed again!

    I got the unit, getting it to link-up. At first, the signal was STRONG, then crashes. Wifi just dies, after a few minutes, signal is back. It's a rollercoaster. Not good for security cams. Would NOT recommend this to my cat or dog. Waste of money!

    Bottom Line: No, I would not recommend this to a friend

    63 people found it helpful

    Link to this Review
    • Apr 7, 2019

      Company Response from Strong Current Enterprises

      Hi Joe. We're sorry to hear about this feedback. We'd like to offer our help so you can maximize the use of the wifi booster.

      Read the following instructions carefully before use.

      IMPORTANT SAFETY INFORMATION

      CAUTION: UNIT MAY FEEL WARM WHEN IN USE DUE TO ELECTRICAL CURRENT FLOW.

      WARNING: DO NOT USE IF UNIT IS WET, DAMP, OR HAS BEEN SUBMERGED IN WATER. MOISTURE MAY ALTER UNIT AND RESULT IN DEFECTIVENESS.

      1. Only use the device for intended purposes.

      2. To reset your Wi-Fi Booster, hold Reset Button for 10 seconds.

      3. For wireless setup, please ensure you have the following:

      Wi-Fi AP/Router Internet Access (Wireless Repeater Mode)

      Broadband Router Internet access (Wireless AP Mode): Connect Wi-Fi Booster to your Router/Switch with Ethernet Cable

      Configuring Your Wi-Fi Booster Wirelessly Plug your Wi-Fi Booster into an outlet.

      Click on the network icon. This can be found on the bottom right of your desktop.

      Click on ‘Connect’ Open browser and enter: http://192.168.10.1

      When the login screen appears, enter ‘admin’ as for your Username and ‘admin’ as your Password.

      When the new web page appears, click on ‘Repeater’ in the top right corner.

      To continue, select Wireless SSID.

      Insert the network key. Click ‘Apply’.

      *Note: Your default wireless SSID and Security key are the same as your AP/Router.

      Configuring Your Wi-Fi Booster with Wireless AP Mode Plug your Wi-Fi Booster into an outlet.

      Open a browser and enter: http://192.168.10.1

      When the login screen appears, enter ‘admin’ for your Username and ‘admin’ for your Password.

      When a new web page appears, click on ‘AP’ in the top right corner.

      When ‘Wireless AP Mode’ screen appears, use the following information to fill in the empty fields:

      SSID: Your ‘SSID’ or wireless network.

      Channel: Auto (recommended).

      Security Type: Set up wireless security and encryption. Supports 64/128-bit WEP, WPA, WPA2, WPA/WPA2.

      Security Key: The ‘Password’ used for your wireless network.

      Click ‘Apply’.

      Wait for your Wi-Fi Booster to restart.

      Configuring Your Wi-Fi Booster with the Ethernet Cable

      Plug your Wi-Fi Booster into an outlet.

      Use an ethernet cable to connect the Wi-Fi Booster to your computer or laptop.

      Open a browser and enter: http://192.168.10.1

      When the login screen appears, enter ‘admin’ for your Username and ‘admin’ for your Password.

      When the new web page appears, click on ‘Repeater’ in the top right corner.

      To continue, select Wireless SSID.

      Insert the network key.

      Click ‘Apply’.

      Please let us know if you have any further questions.


Showing 1-1 of 1